Online Catalog

With 3 PSI internal, audible, safety pop-off alarm. Rigid and durable wing nut and lid. Unique, hand-dipped, soft plastic diffuser. Inlet nipple, stem and diffuser bonded into a single unit. Soft, translucent, double helix thread jar. Latex-free. 8" connector tubing not included.

Manufacturer:  Salter Labs

High Flow Humidifier, 6-15 LPM

A new pressure relief valve and all new down spout with 360 degree rectangular diffuser ports reduces water turbulence and operates quietly. It allows High Flow delivery rates of 6-15 LPM. This Humidifier is specifically suited for applications where delivery via face mask or the Salter-Style ® 1600HF Cannula require high flow rates to maintain desired blood oxygen saturation levels.

Ideal for use with new generation high capacity output oxygen concentrators where flow rates up to 15 LPM are available.

Manufacturer:  Salter Labs

Rectangular diffuser ports provide quiet operation with low system back pressure and a 6 PSI pop-off alarm. new dome lid design incorporates improvements, resulting in high performance iwth rugged durability. Ideal for use with all oxygen sources: concentrator, liquid, tank, wall outlet.

Manufacturer:  Salter Labs

Preset audible alarm at 4psi pressure relief.

Manufacturer:  Hudson RCI

Low-resistance check valves prevent rebreathing and allow exhaled gas to escape. Safety vent allows entrainment of room air. Clear, soft vinyl for patient comfort and visual patient assessment. Complete with 7-ft. oxygen supply tubing.

Manufacturer:  Hudson RCI

The is a more natural alternative to full face masks and preferred by patients who don't like using a cannula. It's breakthrough design greatly reduces skin irritation and is less intrusive than a cannula. The comes with 7 ft. crush resistant tubing.

Manufacturer:  Contemporary Products

Manufacturer:  Salter Labs

Manufacturer:  Salter Labs

This cannula has a dual tubing and a permanent face piece barrier for use with a dual port style oxygen conserver device. One side of the tubing senses patient inhalation and the second tube delivers oxygen to the other nostril. This cannual meets the specifications of all dual port oxygen conserving devices. Tubing lengths are limited to assure optimum performance.

Manufacturer:  Salter Labs

Delivers safe, low/moderate concentrations of oxygen for extended periods of time. Curved, nonflared tip. Comes with 7' kink-resistant supply tubing.

Manufacturer:  Invacare

Kink-resistant. Use while ambulating.
21'

Manufacturer:  Invacare

Soft, closed-cell foam tube cushions that slide over the head or face tube of an oxygen cannula. This will provide a cushion to reduce chafing or pressure to the sensitive tissue in the over the ear area.

Manufacturer:  Salter Labs

For high-humidity aerosol therapy
Distinctive under-the-chin design made of clear, soft vinyl offers patient comfort and ease of speech. Accepts 22mm I.D. tubing.
Does not include tubing.

Manufacturer:  Hudson RCI

A new pressure relief valve and down spout diffuser design allows High Flow delivery (6-15 LPM). This humidifier is specifically suited for applications where delivery via face mask or the new Salter-Style 1600HF Cannula require high oxygen flow rates to maintain desired oxygen saturation.
Ideal for use with new generation high capacity output oxygen concentrators, wall outlet source gas or other applications where flow rates up to 15 LPM are required.

Manufacturer:  Salter Labs

Manufacturer:  Salter Labs

Manufacturer:  Salter Labs

Manufacturer:  Salter Labs

Manufacturer:  Salter Labs

Barbed hose and adaptor for standard D.I.S.S. threaded oxygen outlets.

Manufacturer:  Hudson RCI

Flexible, contoured lip tab provides a high level of patient comfort
Over-the-ear design provides a comfortable and secure fit
Offered with standard (nonflared) or flared nasal tips
Available with standard or universal connector and standard or crush-proof STAR LUMEN tubing in a variety of lengths

Manufacturer:  Hudson RCI

Soft, odorless vinyl. Medium concentration with 7' tubing. Under-the-chin style.

Manufacturer:  Invacare

Hudson RCI is available in a variety of lengths and configurations to meet the needs of patients and clinicians in all care settings.


Distinctively designed STAR LUMEN tubing features a channeled inner lumen to resist kink and occlusion.
STAR LUMEN tubing is now available in a distinctive green tint color to make it more visible against certain background colors.
Oxygen tubing comes with a standard connector on one end and either a standard or universal connector on the other end. Universal connectors attach directly onto the flowmeter eliminating the need for separate adapters.

Manufacturer:  Hudson RCI

Couples oxygen supply tubing utilizing 5mm to 7mm end connectors

Manufacturer:  Hudson RCI

Crush resistent . Seven feet long. Disposable.

Manufacturer:  Invacare

Used to connect longer lengths of tubing either together or to a nasal cannula to allow more freedom of movement without interrupting oxygen flow.

Manufacturer:  Invacare

in the face piece. Can be used at liter flows up to 7.5 to give the equivalent 10 lpm.

Effective with all oxygen sources.
Eliminates the need for two concentrators for high-flow patients.

Provides adequate saturations at higher flow, eliminating the need for a nonrebreather mask.

Manufacturer:  Chad Therapeutics

The Percent-O2-Lock® air entrainment oxygen mask includes a rotating sleeve, opening and closing an air entrainment window. This provides the ability to deliver seven fixed oxygen concentrations to a spontaneously breathing patient. Concentration levels are easily dialed and locked in. The “dial in” air entrainment assembly is affixed to a standard aerosol mask. A high humidity adaptor permits use of a nebulizer with mask if prescribed.

Manufacturer:  Salter Labs

A leak proof, silky smooth 360 degree fully rotating tubing connector. It provides that extra margin of comfort and safety by isolating and protecting the cannula wearer from twisting, tuggin, kinking connecting tubing.

Manufacturer:  Salter Labs

Clear cannula with 4 ' and 7' supply tube. Clear, lightweight cannula with unique one piece anatomical design. Eliminates the need for flap, which can cause irritation. The result is maximum patient comfort. Over-the-ear style ensures secure positioning, allowing complete freedom of movement. Provided with three-channel safety tubing .

Manufacturer:  Salter Labs

Clear, lightweight nasal cannula with unique, one-piece, anatomical design. Eliminates the need for flap, which can cause irritation resulting in maximum patient comfort. Over-the-ear style ensures secure positioning, allowing complete freedom of movement. Provided with three-channel safety tubing or smooth bore tubing in various lengths. Latex-free.
w/7' supply tubing
Safety channel

Manufacturer:  Salter Labs

Made with feather light components for comfort and to reduce behind th ear pressures. The diminutive, streamlined design and clear material is almost invisible on the skin. Great for the active Low Flow user.....up to 3 LPM>

Manufacturer:  Salter Labs

The "Micro" Cannula (for use with 3 lpm or less of oxygen) provides superior comfort for the active, low-flow user. Clear, lightweight nasal cannula with unique, one-piece, anatomical design, eliminates the need for flap which can cause irritation, providing maximum patient comfort. Over-the-ear style provides secure positioning, allowing complete freedom of movement. Provided with three-channel safety tubing. Latex-free.
w/7' supply tubing

Manufacturer:  Salter Labs

Manufacturer:  Salter Labs

Clear, lightweight cannula with unique one piece anatomical design, eliminates the need for flap which can cause irritation, providing maximum patient
comfort. Over-the-ear style provides secure positioning, allowing complete freedom of movement. Provided with three-channel safety tubing.

Manufacturer:  Salter Labs

Special design has three inside channels that help prevent the tubing from becoming occluded. Ideal for home patients where long lengths can cause a potential kinking problem. Available in various lengths. Latex-free. 3/16" I.D.
50'

Manufacturer:  Salter Labs

Plastic swivel connector eliminates twisting, tangling and kinking of oxygen tubing. Latex free.

Manufacturer:  Salter Labs

Disposable 500ml humidifier. Meets criteria for gas humidification. (Use with O2 concentrator.)

Manufacturer:  Invacare

Traps condensed water in small bore tubing/nasal cannula.

Manufacturer:  Hudson RCI